The SSP 110 D ballast spreading and profiling machines form the required standard ballast profile in tracks and points. The machines fill, profile and sweep the track. They have brush shafts for all track systems.
Functional Characteristics
Automatic traverse restrictors of the side ploughs prevent the standard track clearance envelope from being exceeded
Rapid brush shaft replacement unit
Base vehicle for propulsion and power supply
Two end-to-end axes driving axes
Two vertically and horizontally adjustable side ploughs at the front section of the machine
With levelling plough unit for heaviest ballast jobs – consisting of two plough halves running in the direction of the track that can be lowered independently of one another
Sweeping system including one sweeping brush and a transverse conveyor belt for filling the holding compartments or conveying unneeded ballast to the transverse conveyor belt
Rotational speed of the brushing drive can be continuously adjusted up to max. 350 rpm
Removal of ballast between tracks and fastenings by means of two small fastening brushes located behind the front axis
Technical specifications
Overall weight
40 t
Height above top of rail
4.680 mm
Length over buffers
17.000 mm
Number of axles
3
Engine output
300 kW
Maximum speed in train formation
100 km/h
Maximum self-propelled speed
90 km/h
5 adjustable middle plough settings, Traverse restrictor for plough on multiple-track lines
You are currently viewing a placeholder content from Facebook. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
You are currently viewing a placeholder content from Instagram. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
You are currently viewing a placeholder content from X. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
